Model A-21ZX

Shirtpocket Size Ozone Sensor

The Eco Sensors Model A-21ZX portable ozone sensor provides a reliable and inexpensive way ofchecking generators, valves, piping and generalenvironments for ozone leaks and for estimating ozone levels.

Specifications

• Range : 0-10 ppm; sensitivity as low as .02 ppm
• Display : digital readout in .01 ppm increments

Model A-22

Rugged and Versatile Ozone Sensor

A general purpose sensor and monitor. Designed for rugged indoor field use, factories, pilot plants, process facilities, and sensor and monitoring uses of all kinds

Specifications

• Autoranging. 030-1.999 ppm and 2.0-20.00 ppm.
• 10% accuracy. T and RH compensated
• 12 hour (est) battery life. 8 hour charge.
• Plug-in precalibrated sensor modules.
• Internal data logger with instant readout of high, low and average of data.
• Data port for external data logger such as our DL-3

Model C-21

Includes Audio Alarm, Battery operation and Provision for External Alarm and Data Logger

For paint shops, printers, dry cleaners, woodworkers, vehicle repair facilities, chemical production areas and wherever indoor air quality monitoring is required:

Specifications

• Range : Full scale = 50-100 ppm for most solvent based VOCs.
• Bargraph display : Green = normal.,Yellow = caution., Red = danger

Model C-30ZX

For water treatment plants, pulp bleaching mills, ozone generator monitors, photocopier and laser printer centers, fumigation projects, HVAC and indoor air quality systems, vehicular pollution monitors, research labs and pilot plants, and wherever ozone exposure is possible: the C-30ZX has a very fast and continuous response. It is rugged and versitile. There are no touchy controls

Benefits

Constantly monitors your work environment;shows the ozone concentration by a multicolor graphical display, and alarms when there is a health hazard

Specifications

• Range : .02-.14ppm of ozone (LED scale); .02-.30 ppm via external data readout
• Outputs : LED bargraph, audio alarm, 0-3 V analog output such as for data loggers, and external alarm relay contacts; alarm actuation and relay contact closure at .1 ppm (standard) and is programmable.

Model DOM 1

Dissolved Ozone Monitor

Applications

	Bottled water plants
	Food treatment systems
	Equipment sterilizing systems
	Wastewater treatment monitoring
	Factory pure water process and control

Requirements

	Water feed at > 14 psi (1 bar)
	.15 liters/minute (3 gallons/hour) flow to drain
	12 VDC 800 mA power supply

Specifications

• Accuracy : better than 20%. 10% typical
• Readout : 0-2 ppm in .01 ppm increments
• Lowest reading : .03 ppm

Model EZ 1X

Ozone Monitor

For monitoring ozone levels near small ozone generators. Ideal for light commercial applications such as bars and restaurants, hotels, photocopy centers, water bottlers, fumigation, research projects, light manufacturing, swimming pools, and residential and whereverozone exposure is possible.

For permanent on-site use and for portable work by field engineers and installers

Specifications

• Range : .02-.14 ppm of ozone

Model EZ 10W

Dissolved Ozone meter

For monitoring ozone levels near small ozone generators. Ideal for light commercial applications such as bars and restaurants, hotels, photocopy centers, water bottlers, fumigation, research projects, light manufacturing, swimming pools, and residential and whereverozone exposure is possible.

For permanent on-site use and for portable work by field engineers and installers

Specifications

• Ranges : .02-.14 ppm (mg/l), .1-.7 ppm (mg/l)
• Accuracy : Within 20% at higher end of ranges when operated near room temperature.

Model OG-3

Ozone Source Calibration Checker

The OG-3 ozone source calibrator is for calibration verification and simple approximate calibration of Eco Sensors ozone instruments.

It is available in either of two outputs: .1ppm or 1ppm. The OG-3 is powered by an AC adapter supplying 12 VDC.

The OG-3 uses a precision quartz UV lamp ozone generator. Its output is adjusted in our laboratory by comparison with a NIST traceable standard.

Specifications

• Ozone Source : UV lamp
• Output Ozone Concentration : .1ppm (standard) or 1ppm (upon request)
• Accuracy : 10%
• Warm-up time : 30 minutes
• Temperature of use : Indoor room temperature

Model OS-1X

Typical Applications

Control of ozone purifiers Ozone overload protection for industrial processing and storage, and air treatment in public places Leakage alarm for water treatment plants,semiconductor manufacturing, and for bleaching, cleaning, and sterilization processes.

Specifications

• Range and Accuracy : .03-.1 ppm of ozone. Approximately 20% Accuracy

Model OS-4

Typical Applications

	Monitor ozone levels in treatment storage areas for fruits, vegetables, and other agricultural products. Monitor ozonated HVAC systems. General monitoring at .03-20 ppm.
	Control the output of ozone generators using the set-point controlled relay in the OS-4.
	Use as either ozone leak alarm or ozone failure alarm for all sizes of ozone generators.

Specifications

• Range and Accuracy : .03-20 ppm of ozone.
• Accuracy : 10-15% (Depends on application).
• Temperature and humidity : 5-40°c 20-95% RH

Model -UV-100

Specifications

• UV Source : 254 nm mercury lamp
• Range : .01-900 ppm v/v in 3 ranges: 0-1.00 ppm, 0-10.0 ppm, 0-900.0 ppm
• Outputs : Digital display. 0-2.5 V, 4-20 mA, data logging
• Accuracy : 2%