| Mini-centrifuge/vortex CombiSpin FVL-2400N |
| |
|
Mini centrifuge/vortex CombiSpin FVL-2400N is especially designed for genetic engineering research (for PCR-diagnostics experiments). It can be used in microbiological, biochemical, linical laboratories and industrial biotechnological laboratories.
CombiSpin ensures ossibility for the simultaneous mixing and separation of the samples, using centrifuge and mixing modules, located on the common spin-module. It is provided with protection mechanism that stops the rotor motion when the lid is opened.
Rotors R-1.5 and R-0.5/0.2 are supplied with CombiSpin other rotor types are available including rotor for strips (see below).
Standart rotors
 |
| R-1.5 |
rotor for 12 x 1.5 ml microtest tubes. |
|
|
 |
| R-0.5/0.2 |
rotor for 12 x 0.5 and 12 x 0.2 ml microtest tubes. |
|
|
| Optional rotors |
 |
| R-2/0.5 |
| rotor for 8 x 2.0 ml + 8 x 0.5 ml microtest tubes. |
|
|
 |
| R-2/0.5/0.2 |
| rotor for 6x2,0 ml + 6x0.5 ml + 6x0.2 ml microtest tubes. |
|
|
 |
| RSR-16 |
| rotor for 2 x 8-section 0,2 ml microtube strips. |
|
|
|
|
Specification
- Rotation speed (constant) : 2400 RPM.
- Autostop when the lid open.
- Max RCF:
- from the middle of the test-tube : 300 x g.
- from the bottom of the test-tube : 700 x g.
- Continuous and impulse working modes.
- Power : 220/240 V, 50/60 Hz, 30 W.
- Weight : 2,1 kg.
- Dimensions : 190x235x125 mm.
|
| |
| Mini-centrifuge/vortex Microspin FV-2400 |
| |
 |
|
|
Mini centrifuge/vortex Microspin FV-2400 ensures possibility for the simultaneous mixing and separation of the samples, using centrifuge and mixing modules, located on the common spin-module.
FV-2400 is an "open type" centrifuge (without lid), that increases the speed of centrifugation andresuspension operations.
FV-2400 is especially designed for genetic engineering research (for PCR-diagnostics experiments).
|
|
|
| Rotors |
Standart rotors
|
| R-1.5 |
rotor for 12 x 1.5 ml microtest tubes. |
|
|
|
| R-0.5/0.2 |
| rotor for 12 x 0.5 and 12 x 0.2 ml microtest tubes. |
|
| Optional rotors |
|
| R-2/0.5 |
| rotor for 8 x 2.0 ml + 8 x 0.5 ml microtest tubes. |
|
|
|
| R-2/0.5/0.2 |
| rotor for 6x2,0 ml + 6x0.5 ml + 6x0.2 ml microtest tubes. |
|
|
|
| RSR-16 |
| rotor for 2 x 8-section 0,2 ml microtube strips. |
|
|
|
Specification
- Rotation speed (constant) : 2400 RPM.
- Autostop when the lid open.
- Max RCF:
- from the middle of the test-tube : 300 x g.
- from the bottom of the test-tube : 700 x g.
- Continuous and impulse working modes.
- Power : 220/240 V, 50/60 Hz, 30 W.
- Weight : 1,7 kg.
- Dimensions : 120x170x120 mm.
|
|
|
| Centrifuge/Vortex Multi-Spin MSC-3000 |
| |
|
|
| |
|
Centrifuge/vortex Multi-Spin MSC-3000 is a product of many year evolution of spin-mix-spin technology that is intended for collecting microvolumes of reagents on the microtube bottom (first centrifugation spin), following mixing (mix) and collecting the reagents again from the walls and cover of the microtube (second spin).
We named this repetitive algorithm of operation that is aimed at reducing the mistakes during sample preparation in PCR analysis a "sms-algorithm".
- Multi-Spin is a fully automatic device for reproducing sms-algorithm for 12 tubes at one time, that allows saving time considerably.
- A must-have instrument for PCR-analysis.
- Multi Spin is four devices combined in one:
- Centrifuge* (regulated time and rotation speed);
- Vortex (3 mixing modes - soft, medium, hard; regulated time);
- Centrifuge/vortex;
- SMS-cycler for realization of the sms-algorithm.
|
|
| |
| Rotors |
Standart rotors
|
| R-1.5 |
| rotor for 12 x 1.5 ml microtest tubes. |
|
|
|
| R-0.5/0.2 |
| rotor for 12 x 0.5 and 12 x 0.2 ml microtest tubes. |
|
| Optional rotors |
|
| RSR-16 |
rotor for 2 x 8-section 0,2 ml microtube strips. |
|
|
|
Specification
- Spin regulation : 1000 - 3500 RPM (increment 100 RPM).
- Spin timer : 1 sec - 99 min.
- Mixing strength : soft, medium, hard.
- Mixing time : 0-20 sec (increment 1 sec).
- Max RCF : from the middle of the test-tube (650 x g), from the bottom of the test-tube (800 x g).
- SMS-cycle regulation : 1-999 cycles.
- Power : External power supply: AC 12V, 830 mA.
- Weight : 2,5 kg.
- Dimensions : 190x235x125 mm.
|
|
|
|
|
| Personal Vortex V-1 plus |
| |
 |
|
Ideal instrument for gentle mixing to vigorous resuspension of cells and biological and chemical liquid components.
Vortex has two modes:
- continuous operatin;
- impulse operation (activated by pressing the cap with the tube bottom).
|
Specification
- Speed range : 250-3000 RPM.
- Mixing module for tubes from : 1.5 to 50 ml.
- Maximum mixing volume : 30 ml.
- Eccentric mixing principle.
- Power : External power supply: DC 12V, 500 mA.
- Weight : 1,1 kg.
- Dimensions : 90x150x80 mm.
|
| |
|
|
| Laboratory Medical Centrifuge LMC-3000 |
| |
|
|
| |
|
LMC-3000 is a modern low-speed benchtop centrifuge. LMC-3000 is designed for operation with 96-well microtitre plates and centrifuge tubes up to 50 ml. It is widely used equipment in biomedical profile laboratories applicable in biological liquid (blood, urina) and other bioorganic substances analysis.
The unique microtitre plate rotor design allows conducting separation of different component microquantities when conducting immunoenzyme analysis.
Features
- Easy set up of centrifugation parameters (time and speed) and simultaneous display of the set and actual parameter values;
- Safety: metal protective housing and metal lid, automatic imbalance switch-off, lid lock when centrifuge is running provide safe operation at all speeds;
- Low noise level;
- Soft run-up and run-down of the rotation;
- Wide choice of accessory rotors.
|
| Rotors |
 |
| R-6 |
Centrifuge tube with cap, conical bottom. |
|
|
 |
| R-12/15 |
Centrifuge tube with cap, conical bottom. |
|
 |
| R-12/10 |
| Centrifuge tube without cap, round bottom. |
|
|
 |
| R-2 |
| Standard 96-well microtiter plates. |
|
|
Specification
- Regulated speed for centrifuge tubes : 1000-3000RPM (increment 100 RPM).
- Regulated speed for microtitre plates : 1000-2000RPM (increment 100 RPM).
- Chamber diameter : 335 mm.
- Centrifugation time : 1 - 30 min (Increment 1 min).
- Display : LCD.
- Power : 230 V, 50/60 Hz, 130 W.
- Weight : 13,5 kg.
- Dimensions : 470x400x235 mm.
|
|
|
| Multi - Vortex V-32 |
| |
|
Multi - Vortex V-32 is a modern successor of the previous product Vortex F/S-16. V-32 is intended for intensive stirring of bacterial and yeast cell, washing from the culture medium and extraction of metabolites and enzymes from cells and cell cultures.
Vortex is applicable for
- performing various DNA operations- deproteinisation of DNA/ protein complexes;
- purification of low-molecular DNA/RNA fragments in PCR- diagnostic.
Universal Vortex with various tips. Device is supplied with a 32-socket universal platform* for Eppendorf type tubes up to 1,5 ml (1.5/0.5/0.2 ml - 16/8/8 sockets) and a tip for mixing single tube up to 15 ml.
Multi -Vortex has two operation modes
- continuous operation;
- impulse operation.
*An optional 6-socket platform for 10 ml tubes (max. tube diameter 15 mm) can be supplied on request.
Specification
- Speed range : 500-3000 RPM.
- Acceleration time : 3 sec.
- Orbit : 2 mm.
- External power supply : DC 12V, 500 mA.
- Weight : 1,5 kg.
- Dimensions : 120x180x100 mm.
|
|
| |
